View Single Post
Old 5th Aug 2007, 6:21 pm   #8
Radio_Dave
Nonode
 
Radio_Dave's Avatar
 
Join Date: Jun 2004
Location: Norwich, Norfolk, UK.
Posts: 2,519
Default Re: Testing an output transformer

Thanks for the replies

While the transformer is out I might as well work out the turns ratio, in case it fails in the future.

I know how to do it with a single ended transformer, but I'm not sure how to do a push pull one. Do I apply the AC voltage across the whole primary winding and disregard the centre tap?

Thanks
David
Radio_Dave is offline