View Single Post
Old 23rd Jan 2019, 8:58 pm   #120
Jolly 7
Octode
 
Join Date: Feb 2018
Location: Southampton, Hampshire, UK.
Posts: 1,051
Default Re: More Chinese AM radio kits

My suggestion would be to use 2N3904 for both V2 and V3. Leaving 9018G in for V1 and V4 will probably be ok. The C945s for V5 to V7 should be ok too, but as mentioned earlier V5 needs an additional 10ohm resistor from emitter to ground. A 5.6 ohm resistor is also needed from the junction of emitters V6 and V7 to ground.
Jolly 7 is offline