Hello Dave,
Quote:
Originally Posted by davegsm82
If its any use to you, I can offer a PCB with 3x HDSP-F303 (+2x HDSP-F503) Fig-8 displays, these are about 9mm wide by 13mm tall each. They will be wired in parallel on the PCB, but they could be removed or the PCB could be cut down to suit.Dave.
|
Thank you very much for your offer, that's very kind of you.
I'm afraid they would not be suitable for my application because the are too large, the actual display size is 10mm high but the 'window' through which they would be seen is only 7mm high. Also, they're yellow coloured, which I don't particularly care for!
Maplin have a suitable display which is 7mm high and is very reasonably priced, so I may get those.
Thanks again for your offer.
Regards,
Dave.