Quote:
Originally Posted by crackle
I have used Loctite Glass bond and got a pretty well invisible joint, but I wouldn't like to trust it structurally on a handle.
When I used a proprietary acrylic glue I ended up with very fine bubbles which formed in the joint during the curing.
Maybe a fast cure in a slightly warm oven would have helped stop the bubbles forming.
Mike
|
Interesting you should mention Loctite Glass Bond Mike, it's a product I have used over the decades with great success.
Does it still exist though? I've been looking for it for a while.
Just to be clear, this is an empty tube of the product I mean.
Searches for Loctite Glass Bond seem only to find a product called "Loctite Super Glue Glass", which can't be the same product, for one thing GB needs UV light to cure and SGG does not.