Quote:
Originally Posted by vinrads
is the 220k ohm red red yellow, resistor connected to pin4 (grid1) and the other end to chassis make sure that thick wire goes to chassis ,i take it the 220k is ok it looks new,what is the reading from pin 5 (cathode) to chassis in ohms with set off.
|
220k resistor is wired as follows, one pin from speaker to chassis loom has a wire rail attached, then the 220k is next on the rail, from that the 220k is connected to a 0.1 uf yellow cap which links into a wire that connects to pin4 in one direction, and chassis in the other.
500ohms is the answer for pin 5