UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Display shimmering at edges ( PM3375 Philips )

Oldgeorge · 14th Jul 2018, 12:16 pm

I am having an issue with my PM3375 scope.
The problem is that the trace in the centre section of the CRT is fine but towards the outside edges it sort of shimmies very quickly from side to side.
Its the same in all modes including digital freeze mode.
The menu text in digital mode is ok in the centre but " raggy" at the ends.
All controls work normally.
The effect is on all timebase speeds.

14th Jul 2018, 12:16 pm	#1
Oldgeorge Retired Dormant Member Join Date: Feb 2017 Location: Seaham, County Durham, UK. Posts: 35	Display shimmering at edges ( PM3375 Philips ) I am having an issue with my PM3375 scope. The problem is that the trace in the centre section of the CRT is fine but towards the outside edges it sort of shimmies very quickly from side to side. Its the same in all modes including digital freeze mode. The menu text in digital mode is ok in the centre but " raggy" at the ends. All controls work normally. The effect is on all timebase speeds. Attached Thumbnails Last edited by Oldgeorge; 14th Jul 2018 at 12:22 pm.