View Single Post
Old 22nd Jan 2020, 12:37 pm   #7
kalee20
Dekatron
 
Join Date: Feb 2007
Location: Lynton, N. Devon, UK.
Posts: 5,745
Default Re: Which Dremel tool..?

Agree Jeremy's advice - and I've removed 5mm wide strips, no problem.

After cutting with a scalpel or Stanley knife, I get the soldering iron, start tinning the bit I want to lift, and start peeling. When at solder-melting temperatures, the copper peels much more easily as epoxy loses strength. You have to do it hot, as the strength returns on cooling.
kalee20 is online now