Re: HDMI to AV converter with Aurora - aspect ratio problem
Hi i have done this myself with one of my tvs. but to get the correct aspect ratio you need an older pc. i use a vga to composite took the yellow wire from the converter and the audio from the pc using a jack to composite splitter. than ran it in to a rf modulator and to the tv. i can do a video of the setup if anyone wants to see it. reason for the older pc it has support for 4:3 at low resolutions.
i also have done the same with hdmi but setup diftently. i used a hdmi to component converter and used a newer vcr with component in and recorded pc to vhs tape. iused the vcr modulator to send picture to tv. but this method you get overscan
Alan
|