Re: Tandberg 3000X
There is no special Tandberg copying cable. All you need is a normal 5-pin DIN plug to 4 phono plugs cable (as in the attachment). Determine which are the out-put phono plugs (probably black = right and yellow = left) and connect to the input of the Behringer UCA202.
Insert the Behringer's USB plug into the laptop before you open Audacity. Open Audacity and you will then see a choice of microphone inputs. Choose the one that has USB audio in it (see attachment). Set the microphone level, start the tape and press the red record button in Audacity.
I have a Tandberg 3000x and a Behringer UCA222 (which is the same as the 202 ; in fact mine says UCA202 on the back) and I have had no problem in making a recording (see attachment).
If this don't work I can only assume there is something wrong with the Audacity download
|