Re: Restorers dream part 2 the chassis.
Col
If the 30P4 (or 30P19) and U191 are cold, the screen feed resistor on the 30P? might be OC. Scratch its top cap with an insulated screwdriver - if no trace of a spark, the line OP stage isn't running so it's safe to see if there's HT on the two top caps.
If not, then it might be an error in the wiring on the replaced LOPTx.
Don't worry about the U25 as it won't be doing anything at all at the moment.
I'm assuming that there is HT present and you have sufficient mains input re Jeffrey's post.
I won't see your replies for a few days as you'll know.
__________________
Mike.
|