Quote:
Originally Posted by Tom_I
I thought I'd just have a quick go to see how feasible it is to dismantle the can, using a dud example. I held it by the leads and slowly revolved it while applying the soldering iron to the rim of the can. I then braced the can on some newspaper with the iron, gently pulled, and voila!
|
Regardless of what this does to the original AF117, it sounds the best way to stuff an AF125 into an old AF117 can - just remove the can as you have done, insert the AF125, and fill up the case with hot melt glue
Much better than trying to drill a hole in the bottom.
Paul