UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

MotorBikeLes · 25th Feb 2016, 2:54 pm

Surely if you look at the circuit, it IS a balanced input, so does that not rule OUT a 75 ohm coax lead?
I think if you used a 75 ohm lead, it would be better to feed the inner to either half of the pair, with the earthy side to the actual earthed socket.
I for one WOULD just connect either way, or even just an odd AVO lead into one at this stage, but I would be interested in a considered response to my interpretation.
Les.

25th Feb 2016, 2:54 pm	#132
MotorBikeLes Nonode Join Date: Dec 2012 Location: Kirk Michael, Isle of Man Posts: 2,350	Re: Philips B3G63A Surely if you look at the circuit, it IS a balanced input, so does that not rule OUT a 75 ohm coax lead? I think if you used a 75 ohm lead, it would be better to feed the inner to either half of the pair, with the earthy side to the actual earthed socket. I for one WOULD just connect either way, or even just an odd AVO lead into one at this stage, but I would be interested in a considered response to my interpretation. Les.