UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

fetteler · 25th Jan 2022, 1:23 pm

On the GL75 there is a little wire on the signal terminal block (located under the platter) connecting the screen of the signal cable to chassis earth. This often causes hum problems which can easily be remedied by cutting the wire.

Here's a picture showing the wire (turquoise arrow) which I did for the LH website.

Steve.

25th Jan 2022, 1:23 pm	#6
fetteler Octode Join Date: Jul 2011 Location: Staffordshire Moorlands, UK. Posts: 1,475	Re: lenco GL75 hum problem On the GL75 there is a little wire on the signal terminal block (located under the platter) connecting the screen of the signal cable to chassis earth. This often causes hum problems which can easily be remedied by cutting the wire. Here's a picture showing the wire (turquoise arrow) which I did for the LH website. Steve. Attached Thumbnails __________________ Those who lack imagination cannot imagine what is lacking...