View Single Post
Old 4th May 2021, 8:46 pm   #31
PYE 405
Join Date: Dec 2009
Location: Chatteris, Cambridgeshire, UK.
Posts: 54
Default Re: Bush Dual standard chassis.

Originally Posted by slidertogrid View Post
What is the best method to warm up the overwind?
I have got a mains transformer that I think is around 20/24 Volts secondary will that do ? Should I use AC or rectify it or doesn't it matter?
AC or DC it won't matter, but I found about 35v was needed to get it hot enough to aid seperation of the overwind in my case. Obviously you want it to slide off without undue force, but not so hot that you can't hold it.
Oh, and it will be messy. Be prepared to peel off all the soft tar to reveal just the overwind doughnut. You won't harm the windings as they will be covered in a fabric tape.

Last edited by PYE 405; 4th May 2021 at 8:52 pm.
PYE 405 is offline   Reply With Quote