Quote:
Originally Posted by Argus25
The better way to repair these is to un-stack them and fit a pre-made bobbin from AES (unless you have the rewinding gear). These can readily be wired in auto-transformer or isolating mode.That is if you want to keep the original stack and brackets. The wound bobbins come from AES (Antique Electronic supply USA). There are essentially two sizes available, in one case you would have to buy the transformer and remove the bobbin.
Or if the transformer you have is not that special looking, just fit a new one from AES. Have a look at their stock lists.
|
I have just been onto the AES website and it seems they no longer supply the wound bobbins, just the complete transformers.
Peter