UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Station X · 14th Feb 2018, 1:22 pm

OK. Use your meter to check the HT voltage at the smoothing capacitors. Meter set to DC volts. NEG lead connected to chassis. POS lead used to probe each of the tags on the can in turn. No test voltages given in circuit, but expect 200 to 250V.

14th Feb 2018, 1:22 pm	#4
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,288	Re: Dansette Bermuda Mk 1 OK. Use your meter to check the HT voltage at the smoothing capacitors. Meter set to DC volts. NEG lead connected to chassis. POS lead used to probe each of the tags on the can in turn. No test voltages given in circuit, but expect 200 to 250V. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.