UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - G & E Bradley CT-471

Sinewave · 2nd Nov 2018, 7:31 pm

Thanks.

I'm getting somewhere.

Just going again through the set up procedure.

I find adjusting RV1 is making no difference, I've put a different pot in for now as the pot was stuck at 2.5k and wouldn't adjust to anything else, but still nothing. I've got to leave it now for the evening but I'm wondering what else could be causing no adjustment to the set up.

RV1 should be adjusted to set the meter to read FSD on VDC, 0.04v range with 40mV supplied.

2nd Nov 2018, 7:31 pm	#67
Sinewave Octode Join Date: May 2016 Location: Oxfordshire/Bucks borders, UK. Posts: 1,604	Re: G & E Bradley CT-471 Thanks. I'm getting somewhere. Just going again through the set up procedure. I find adjusting RV1 is making no difference, I've put a different pot in for now as the pot was stuck at 2.5k and wouldn't adjust to anything else, but still nothing. I've got to leave it now for the evening but I'm wondering what else could be causing no adjustment to the set up. RV1 should be adjusted to set the meter to read FSD on VDC, 0.04v range with 40mV supplied. __________________ Avometer, vintage Fluke and Marconi collector. Also interested in vintage Yaesu and KW. Last edited by Sinewave; 2nd Nov 2018 at 7:55 pm.