Quote:
Originally Posted by peter_scott
The modeline editor accepted my modeline but my graphics card refused to respond correctly with the rather low pixel clock rate involved. I've tried various modelines now but the lowest line rate that I can get to work is 200 as shown below.
|
I was wrong about the lower line rate limit. The modeline editor does reject some inputs but if you save them (with reboot) then they can be accepted.
Here for example is 120 lines with 25Hz frame rate.
Modeline "1500x100_25 3.0kHz" 8.840 1500 2828 2938 2948 100 105 110 120 -hsync -vsync
Peter