Re: Bush VTR103 restored
I used the faulty AF114 or was it 5 not sure but in the past someone had chopped the screen lead very short I did manage to solder a wire to the stub , cleared the short using the voltage method connect the b/e /c together apply 30volts short gone for how long ! don't know , a good tip here don't use high voltage ie 150v tried it twice now two totally duff transistors , they tested ok before apart from screen short .
To answer Paul query regarding the handle , The pic does not show the proper colour metallic grey I thought all most any colour goes with grey,I did paint the handle a nice contrasting cream also the knobs and the push buttons and trim .
The case was repaired with car body filler a good wash, rub down with wet and dry , plastic primed then two top coats , just need to buy a micro tip fibre pen for the lettering was it worth it hours and hours of work , to me yes it was . Mick.
Last edited by vinrads; 10th Apr 2018 at 8:35 pm.
|