View Single Post
Old 8th Dec 2019, 6:00 am   #2
Terry_VK5TM
Nonode
 
Terry_VK5TM's Avatar
 
Join Date: Oct 2010
Location: Tintinara, South Australia, Australia
Posts: 2,324
Default Re: Crystal ladder networks

Can't remember where I saw it recently (possibly SPRAT magazine), but lower frequency xtals at the ends of the filter and consecutively building up to higher value ones in the middle.

So low-middle-highest-middle-low xtal frequencies.

Although theoretically, if the differences are 100Hz or less between xtals, it shouldn't have much if any effect.
__________________
Terry VK5TM
https://www.vk5tm.com/
Terry_VK5TM is online now