UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

FRANK.C · 16th Apr 2010, 11:11 pm

Hi Les
Had a look at that case its a good one at a reasonable price but as you say its a pity that its not a bit bigger. I will attempt to do as Mike suggested and make an enclosure from MDF with aluminium panels, but that's a long way off yet
The panel markings are another problem and something I haven't had much successes with. Knobs are another thing that I am looking at now, because of the type of switches that I am using I will need collet knobs in both 6 mm and ¼ inch sizes.
It sure is a big project.

Frank

16th Apr 2010, 11:11 pm	#311
FRANK.C Heptode Join Date: Feb 2006 Location: Roscommon, Ireland Posts: 732	Re: The "Sussex" Homebrew Valve Tester. Hi Les Had a look at that case its a good one at a reasonable price but as you say its a pity that its not a bit bigger. I will attempt to do as Mike suggested and make an enclosure from MDF with aluminium panels, but that's a long way off yet The panel markings are another problem and something I haven't had much successes with. Knobs are another thing that I am looking at now, because of the type of switches that I am using I will need collet knobs in both 6 mm and ¼ inch sizes. It sure is a big project. Frank