UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

NorfolkDaveUK · 29th Sep 2018, 1:06 pm

I`m still getting no-where with this . If I switch the output to 1-3 or 2- 4 then there is plenty of voltage to allow me to set what i need but in stereo , it drops like a stone . I`ve cleaned all the switches and relay relentlessly and it still doesn`t want to play fair with me i`m trying to figure out which pin is which on the stereo switch but its such a yucky board I`m struggling a bit with that too ....sigh.

29th Sep 2018, 1:06 pm	#12
NorfolkDaveUK Banned Join Date: May 2018 Location: Norwich, Norfolk, UK. Posts: 605	Re: N4510 help needed I`m still getting no-where with this . If I switch the output to 1-3 or 2- 4 then there is plenty of voltage to allow me to set what i need but in stereo , it drops like a stone . I`ve cleaned all the switches and relay relentlessly and it still doesn`t want to play fair with me i`m trying to figure out which pin is which on the stereo switch but its such a yucky board I`m struggling a bit with that too ....sigh.