UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Dynatron Tape to Tape

ben · 13th Aug 2019, 9:13 pm

I agree with Paul.
These machines normally have built in amp and speaker. If you get no sound it could be that either of these areas is defective, or for all you know the unit may be stuck in 'record' and erasing the tapes you are trying to play!

If you want to try and get this unit working, get hold of some sacrificial tapes from ebay or elsewhere. Do not try to use any tape you suspect may have irreplaceable recordings on.

13th Aug 2019, 9:13 pm	#3
ben Dekatron Join Date: Aug 2006 Location: Madrid, Spain / Wirral, UK Posts: 7,498	Re: Dynatron Tape to Tape - Help Needed I agree with Paul. These machines normally have built in amp and speaker. If you get no sound it could be that either of these areas is defective, or for all you know the unit may be stuck in 'record' and erasing the tapes you are trying to play! If you want to try and get this unit working, get hold of some sacrificial tapes from ebay or elsewhere. Do not try to use any tape you suspect may have irreplaceable recordings on. __________________ Regards, Ben.