Re: Help with 6802 Microcontroller
Today things not looking so promising!
With the same setup the signal generator refuses to boot up!
I am also having problems with my logic analyser, which is not clocking on the E line.
When I use the internal clock (20MHz), the E is a perfect squarewave, but not getting reliable results when using E as external clock.
Need to sort this out before I can move on again. I am sure I am close. I have lost confidence in the data I am looking at!
When I scope all the logic and PSU lines they are all a good 5V, with no significant noise. I scoped the E line looking for wide, or short pulses but found nothing
The power supplies are all up before RESET.
I will look to see if I have any spare EPOMS and burn some new ones to try.
My capacitors have arrived, so will replace all these.
I cant do anything over the weekend, so will come back as soon as I have anything more to add
Thanks for all the help
peter
__________________
SPECIALIST.....Knows everything about nothing
EXPERT..........Knows nothing about everything
|