Re: Firestone TV from ETF auction
Here photo of the cabling before I put a hand on it (somebody did it before but badly ). See on the control pot plate, the two holders I put to fix it again on the rear chassis. I was wrong in my measurement, so the axis of the pot are too far at the right. I will correct that.
Hopefully, the chassis had two holes already placed for me to fix the holders..
When I receive the TV, I first thought that all the back pots were missing ! Too bad, until I found their plate 'floating underneath..
Last edited by AC/HL; 17th May 2018 at 7:31 pm.
Reason: Photos added
|