UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Station X · 23rd Jun 2017, 1:09 pm

The set will wok perfectly without C30, but as you have it, it's probably best left in place.

As an alternative you could wire C30 across the incoming supply, but this means it will always have a voltage across it.

The original mains connector was unpolarised so either L or N could be switched. You can change over the wiring so the L is switched if you wish.

23rd Jun 2017, 1:09 pm	#162
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,287	Re: Bush A.C.91 The set will wok perfectly without C30, but as you have it, it's probably best left in place. As an alternative you could wire C30 across the incoming supply, but this means it will always have a voltage across it. The original mains connector was unpolarised so either L or N could be switched. You can change over the wiring so the L is switched if you wish. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.