UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Station X · 14th Mar 2018, 12:04 pm

All very interesting, but as I said earlier the OP is reporting readings which are up to 60V low in a circuit where the maximum voltage is 220V. That's an error of 27% minimum and is clearly indicative of a fault.

Until we get actual readings from the OP stating which electrode/s are 60V low, it's difficult to give further advice.

14th Mar 2018, 12:04 pm	#39
Station X Moderator Join Date: Jan 2003 Location: Ipswich, Suffolk, IP4, UK. Posts: 21,288	Re: Bush VHF 81 Restoration All very interesting, but as I said earlier the OP is reporting readings which are up to 60V low in a circuit where the maximum voltage is 220V. That's an error of 27% minimum and is clearly indicative of a fault. Until we get actual readings from the OP stating which electrode/s are 60V low, it's difficult to give further advice. __________________ Graham. Forum Moderator Reach for your meter before you reach for your soldering iron.