UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Mini-Mod 2021!

Electronpusher0 · 21st Apr 2021, 9:40 pm

The audio input on the pcbs can be either a miniature 3 way socket or by vero pins or wires direct to the Board.

For the socket shown connect the longer terminal to one of the 0V points.
For the shorter terminals connect one to the point marked L and one to the point marked R.
It does not matter which as the Left and Right signals are added to form mono.

Peter

21st Apr 2021, 9:40 pm	#58
Electronpusher0 Nonode Join Date: Jun 2016 Location: Bognor Regis, West Sussex, UK. Posts: 2,300	Re: Mini-Mod 2021! The audio input on the pcbs can be either a miniature 3 way socket or by vero pins or wires direct to the Board. For the socket shown connect the longer terminal to one of the 0V points. For the shorter terminals connect one to the point marked L and one to the point marked R. It does not matter which as the Left and Right signals are added to form mono. Peter