UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

af024 · 17th May 2019, 9:58 pm

Hello Chris,

No I didn't laugh, really, I didn't, but I have to say that I hadn't thought about boiling it . Thank you for the tip. I may well have a go at that, assuming that I can satisfy myself that it is indeed the servo that's packed in and not the loss of feedback pulses (or volts), or whatever it gets from the motor.

As for tracking a spare down .. well so far, that's proving to be very tough indeed.

Regards,

Andy

17th May 2019, 9:58 pm	#7
af024 Octode Join Date: Jan 2003 Location: Ashby-de-la-Zouch (it's not by the sea) Posts: 1,255	Re: Bell and Howell TQII 1652 16mm projector Hello Chris, No I didn't laugh, really, I didn't, but I have to say that I hadn't thought about boiling it . Thank you for the tip. I may well have a go at that, assuming that I can satisfy myself that it is indeed the servo that's packed in and not the loss of feedback pulses (or volts), or whatever it gets from the motor. As for tracking a spare down .. well so far, that's proving to be very tough indeed. Regards, Andy __________________ Now where on earth did I remove that from?