UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

erikossu · 14th May 2018, 4:49 pm

Well, the bulb has to reach over the edge of the back plate to illuminate the scale. I would use these little bit off the lug/set back so the edge of the holder-glass of bulb will be at the edge on the plate. Maybe these will fall of this way is hard to tell.

14th May 2018, 4:49 pm	#2
erikossu Retired Dormant Member Join Date: May 2018 Location: Tallinn, Estonia Posts: 9	Re: Trouble with Grundig scale lamp holders Well, the bulb has to reach over the edge of the back plate to illuminate the scale. I would use these little bit off the lug/set back so the edge of the holder-glass of bulb will be at the edge on the plate. Maybe these will fall of this way is hard to tell.