View Single Post
Old 11th Jan 2019, 9:17 pm   #21
Phil G4SPZ
Dekatron
 
Phil G4SPZ's Avatar
 
Join Date: Apr 2005
Location: Bewdley, Worcestershire, UK.
Posts: 4,736
Default Re: Trio 9R-59D receiver problems.

Quote:
Originally Posted by Humptydumpty View Post
Funny thing about V8 shows less than 1 volt from pin5...
Hi Trev,

So far you’ve told me that the voltage on pin 5 of V8 is 40 volts, then 12 volts, and now less than 1 volt. I asked that you tell us the make and model of multimeter that you’re using. You also received some good advice from James Duncan about pulling out V8 and then measuring the voltage at pin 5.

Did you follow any of this advice? The answers will enable us to point you towards the appropriate next step. Electronics is just as logical as car mechanics.

Forum members have plenty of patience and are keen to help people who may be new to vintage radio repair. However you must realise that to enable us to provide you with the correct advice, you need to provide us with accurate information that is consistent.

If you don’t feel confident about tackling this work yourself with our help, you still have the option to post a request in the ‘service wanted’ section.
__________________
Phil

Optimist [n]: One who is not in possession of the full facts
Phil G4SPZ is offline