View Single Post
Old 9th Nov 2019, 5:48 pm   #58
ms660's Avatar
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 10,687
Default Re: Vintage Radio and Phonograph cutter schematic

Originally Posted by Levente View Post
I did tie the pin 3 and 4 together to chassis. Unfortunately no sound is coming through the speaker or no sound on the external speaker plug either.

Hum is reduced and no any other issues but the sound has gone...
It will kill the sound, that's part of the test, if shorting those grids to chassis has got rid of the loud hum you had with the volume controls turned down then remove the short from one grid and see if the hum gets loud again (volume controls still turned down) if it doesn't then remove the short from the other grid, that should tell you which grid the loud hum is coming in on, let us know which grid it is, ie: pin 3 or pin 4.

ms660 is online now