UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Pioneer CT-F4040

DMcMahon · 1st Jul 2020, 10:15 am

Hello

Fairly uncommon for drive belt dimensions to be listed in manufacturers documentation, so unless someone knows from their own CT-F4040 hands on experience, you will either have to measure the existing ones or if they are difficult to measure (missing/broken/turned to goo) use cotton/fine string etc to get an approximate ID (Inner Diameter).

You can normally gets sets of drive belts for specific models from online sellers and can also purchase larger sets of mixed miscellaneous sized belts in the hope that some will be suitable. Generally speaking they do not have to be precisely the correct size.

David

1st Jul 2020, 10:15 am	#2
DMcMahon Dekatron Join Date: Apr 2019 Location: Worthing, West Sussex, UK. Posts: 6,604	Re: Pioneer CT-F4040 Hello Fairly uncommon for drive belt dimensions to be listed in manufacturers documentation, so unless someone knows from their own CT-F4040 hands on experience, you will either have to measure the existing ones or if they are difficult to measure (missing/broken/turned to goo) use cotton/fine string etc to get an approximate ID (Inner Diameter). You can normally gets sets of drive belts for specific models from online sellers and can also purchase larger sets of mixed miscellaneous sized belts in the hope that some will be suitable. Generally speaking they do not have to be precisely the correct size. David