Hi,
i came across this 19 set on that auction site and took a chance as it was less than Eur 300 with the bits, and to my suprise it arrived in good shape. More interesting the VHF set is all there and it seems to be factory. It hasnt been modified whatsoever, a rare thing given the amount of "improvements" done to them.
Reason I post, this set works (I did wind it up v slowly, so nothing melted) caps are going to need changing, we already had a few waxies end up forming piles on the kitchen table, and i didnt run it long to challenge it. So before I go on an OCD cap change, is there anything i need to do beyond 1 by one replacing the caps and I suspect tidying up the psu. Its the mk3 with the fabulously quiet dual dynamotors .) My neignbour wont be pleased for sure. All advice appreciated.
Heres a few pics if link is allowed-
https://drive.google.com/folderview?...BPs_rV14HoB8hw
Serial number may have been logged already, but I took a shot of the plate for reference.
73s David