UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

crestavega · 14th Feb 2017, 2:02 am

Please could someone help
regarding my Sailor T128 (attempted) restoration, and with reference to its manual

http://peel.dk/SP/pdf/Sailor%20T128%...20(Manual).pdf

there is a "test switch", shown on p.52 of the PDF.

in sections C (iv) and C(v), (p.10 of the PDF), there are instructions to set the test switch to position"TRANSMIT". I cannnot find a position marked TRANSMIT.

this test switch and its functions are summarised in Section D (p10-11) of the PDF. None of these functions are specifically labelled as "TRANSMIT" however, the final paragraph of this section states "leave switch in position 10 Ik3 before reassembling tx"

Is it a safe assumption that position 10 is the TRANSMIT position?

14th Feb 2017, 2:02 am	#22
crestavega Pentode Join Date: Apr 2014 Location: Kirkwall, Orkney, UK. Posts: 165	Sailor T128 confusion Please could someone help regarding my Sailor T128 (attempted) restoration, and with reference to its manual http://peel.dk/SP/pdf/Sailor%20T128%...20(Manual).pdf there is a "test switch", shown on p.52 of the PDF. in sections C (iv) and C(v), (p.10 of the PDF), there are instructions to set the test switch to position"TRANSMIT". I cannnot find a position marked TRANSMIT. this test switch and its functions are summarised in Section D (p10-11) of the PDF. None of these functions are specifically labelled as "TRANSMIT" however, the final paragraph of this section states "leave switch in position 10 Ik3 before reassembling tx" Is it a safe assumption that position 10 is the TRANSMIT position?