I am a little puzzled how the bios was created though. When using GENSYS I could not get it to build a bios with a single 5Mb partition.
e.g.
I would have loved just to use something like the following in the GENSYS .cfg to create an A: drive using the whole disk, however this doesn't work, it just raises an error when tryin to generate the bios.
Code:
;
; --------Winchester Based System-----------
;
.biosmfb ; Use biosw.sys with winchester drivers
* ; Memory size in K or *
5 ; Number of pages of workspace
5 ; Devices
W,*,512 ; Drive A (Fixed format 512 directory entries)
0,QDDS ; Drive B
W,RO201 ; Rodime 5M
0,5,96,80,2,3,15,0 ; Teac FD55GF-V
There has to be a number specified e.g.
Code:
W,5000,512 ; Drive A (Fixed format 512 directory entries)
0,QDDS ; Drive B
However, that gives a different error when using GENSYS. So far the only way to get anything to work is to use the following, which gives me 2 Winchester partitions, A: and B:.
Code:
W,5000,512 ; Drive A (Fixed format 512 directory entries)
W,*,512 ; Drive B (Fixed format 512 directory entries)
0,QDDS ; Drive C