UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Panasonic VCF NV-HS1000 issue

Captain Jack · 9th Feb 2019, 1:43 pm

After two years, my fancy Panny VCR (NV-HS1000) seems to have given up the ghost. I haven't used it for about 6 months - being in the loft, but I am now getting very poor image and out of phase colours.

It seems to have been doing this intermittently in the past but a power cycle usually resolved. Now, nothing helps. I am assuming it's the knackered head but that's based on no knowledge at all. I tried cleaning this as per YouBoobs but no difference.

It's still an expensive VCR to buy working so would rather try fixing this somehow. Any ideas?

9th Feb 2019, 1:43 pm	#1
Captain Jack Diode Join Date: Nov 2018 Location: Bristol, UK. Posts: 3	Panasonic VCF NV-HS1000 issue After two years, my fancy Panny VCR (NV-HS1000) seems to have given up the ghost. I haven't used it for about 6 months - being in the loft, but I am now getting very poor image and out of phase colours. It seems to have been doing this intermittently in the past but a power cycle usually resolved. Now, nothing helps. I am assuming it's the knackered head but that's based on no knowledge at all. I tried cleaning this as per YouBoobs but no difference. It's still an expensive VCR to buy working so would rather try fixing this somehow. Any ideas? Attached Thumbnails