Quote:
Originally Posted by TIMTAPE
....A line level signal is too high for a mic level input. It will distort, and possibly damage the recorder's electronics.
|
Hi, it's unlikely that the recorders electronics would be damged by feeding a line level signal in to a socket intended for a mic level input, you would experience quite a bit of distortion though if the machine only has "Automatic", or fixed, recording level control.
To feed a line level signal in to a Mic input you need to attenuate the signal by inserting a resistor of between 470 K and 1 Meg Ohms in series with the input lead(s)
Regards
Andrew