UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Need a very low power 500Khz working transmitter to send morse code.

G0HZU_JMR · 30th May 2019, 12:13 am

Yes, it's not that clear. I assumed it would be the receiver connected to a regular outdoor antenna and the transmitter sat alongside the receiver running into a dummy load. The risk there is that the radiated morse signal from the dummy load might not be that much greater than the leaked radiation from the unkeyed oscillator inside the transmitter.

30th May 2019, 12:13 am	#6
G0HZU_JMR Dekatron Join Date: Sep 2010 Location: Cheltenham, Gloucestershire, UK. Posts: 3,077	Re: Need a very low power 500Khz working transmitter to send morse code. Yes, it's not that clear. I assumed it would be the receiver connected to a regular outdoor antenna and the transmitter sat alongside the receiver running into a dummy load. The risk there is that the radiated morse signal from the dummy load might not be that much greater than the leaked radiation from the unkeyed oscillator inside the transmitter. __________________ Regards, Jeremy G0HZU