UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Timbucus · 31st May 2020, 11:06 am

and another thing I was interested with the decoupling point on CAPS as the original had even dropped one from the BOM. I put in only the original two C3/C4 but due to the fact I know my PSU produces ringing I did add the two by the PSU in 15 and 17 - didn't really check where they were on the circuit but, assumed close to the Regulator...

31st May 2020, 11:06 am	#470
Timbucus Octode Join Date: Mar 2019 Location: Barry, Vale of Glamorgan, Wales, UK. Posts: 1,364	Re: MK14 schematic revisions and another thing I was interested with the decoupling point on CAPS as the original had even dropped one from the BOM. I put in only the original two C3/C4 but due to the fact I know my PSU produces ringing I did add the two by the PSU in 15 and 17 - didn't really check where they were on the circuit but, assumed close to the Regulator...