Quote:
Originally Posted by greenstar
You may know this but the bottom panel is often removed to align the set, and as it affects the alignment may not get put back. Apparently when aligned in the factories a special plate was used with holes to allow access to the coils, so that when the base was finally put back there was no change. Possibly an aluminium plate would not ruin the alignment?
|
I was thinking of cutting a wood panel and screw it onto the bottom of the chassis as well. But shiny aluminium panel would be very nice and much better come to think of it. I have a mitre saw which can cut metal, so it is possible to to cut into exact measure, drill the screw holes to the chassis, and yes it is possible.
It will be the final stage of the restoration. It will be the exciting moment then.
