UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Winding own oscillator coil on a ferrite former

regenfreak · 12th Sep 2019, 1:38 am

Try to clarify that i am not doing wave winding but my own alternative that layers are aligned at an angle to the inductor axis. Typical wave winding has two crossovers per turn. In my case, i have one crossover per layer. Then the 3rd and 4th layers starts at 90 degrees shift staggered above the 1st and 2nd layers.
I have the tendency to do overthinking..perhaps i will just do scramble windings.

12th Sep 2019, 1:38 am	#22
regenfreak Heptode Join Date: Nov 2018 Location: London SW16, UK. Posts: 655	Re: Winding own oscillator coil on a ferrite former Try to clarify that i am not doing wave winding but my own alternative that layers are aligned at an angle to the inductor axis. Typical wave winding has two crossovers per turn. In my case, i have one crossover per layer. Then the 3rd and 4th layers starts at 90 degrees shift staggered above the 1st and 2nd layers. I have the tendency to do overthinking..perhaps i will just do scramble windings.