View Single Post
Old 9th Aug 2018, 7:09 pm   #15
The Philpott
Dekatron
 
The Philpott's Avatar
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 4,106
Default Re: Reviving a Finish

Further to post #11, i found that wax polish was no good, as a white residue was left in the low points after the solvent had departed. I went over the 'skin' sparingly with 3 in 1. Thus far this is satisfactory, leaves only a slight sheen and once it has soaked in there is no significant odour.
The Philpott is offline