UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post

Heatercathodeshort · 3rd Feb 2013, 9:22 am

You don't need to get the valve tester working, believe me. It will not help you with your restoration. [They are only used by valve dealers these days] I have a TMK multimeter that I used to carry in my service kit. It works OK but the 15v battery for the high ohms range is low but I think you can get these off the Internet.
You are most welcome to it foc and it's easy to use. PM me if you think you would like it with your details. John.

3rd Feb 2013, 9:22 am	#78
Heatercathodeshort Dekatron Join Date: Jun 2005 Location: Warnham, West Sussex. 10 miles south of DORKING. Posts: 9,147	Re: My Bush TV43 restoration. You don't need to get the valve tester working, believe me. It will not help you with your restoration. [They are only used by valve dealers these days] I have a TMK multimeter that I used to carry in my service kit. It works OK but the 15v battery for the high ohms range is low but I think you can get these off the Internet. You are most welcome to it foc and it's easy to use. PM me if you think you would like it with your details. John.