View Single Post
Old 23rd Sep 2019, 2:39 pm   #14
Croozer
Pentode
 
Join Date: Jul 2016
Location: Edinburgh, Scotland, UK.
Posts: 110
Default Re: Pye PJ500 blown resistor.

Both ends of the output transformer secondary are connected to the speaker. One end is , as you identified, connected to earth.

The other (non-earthy) side shows an additional connection which runs off the top of circuit diagram extract that i can see. I suspect this additional connection of being a negative feedback loop and an easy check would be to temporarily snip it and see if the squack clears.
Croozer is offline