View Single Post
Old 1st May 2019, 4:54 pm   #39
Dorian27
Heptode
 
Join Date: Jun 2018
Location: Carmarthenshire, Wales, UK.
Posts: 564
Default

Hi can any one tell me this resistor is has 3 cables comming off it it is like 2resistors in one one end has 200 ohm on it and the other has 1.5k on it the problem is that is getting very hot if used longer than ten minutes it smokes I. Believe it for the motor I have cleaned and oiled all three motors and they sound and run good so I don't know what to do or how or what I need to replace it can any one give me any suggestions as I am a novice at this thanks

Can any advise me please this resistor is getting very hot that it smokes after about 10min running I have cleaned and oiled all motor bearings and they are running quietly and smoothly.if it needs replacing what do I need as it seems to be in two halves made to one on one side it has 200 ohm and the other 1.5k can you help please I uploaded pics
Attached Thumbnails
Click image for larger version

Name:	IMG_20190501_154516.jpg
Views:	82
Size:	97.0 KB
ID:	182227   Click image for larger version

Name:	IMG_20190501_154512.jpg
Views:	87
Size:	105.7 KB
ID:	182228   Click image for larger version

Name:	IMG_20190501_154502.jpg
Views:	85
Size:	78.1 KB
ID:	182230   Click image for larger version

Name:	IMG_20190501_154516.jpg
Views:	70
Size:	112.2 KB
ID:	182231   Click image for larger version

Name:	IMG_20190501_154512.jpg
Views:	65
Size:	105.4 KB
ID:	182232  

Dorian27 is offline