UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - Aiwa AD-F410

19Seventy7 · 20th Apr 2019, 10:47 pm

Hi,

I'm by no means an expert, but this could help

I have an F640, which did this. I found that two small wires were touching, which shut the motor off, near the front of the mechanisms. I don't know if this could be the same on yours. (Perhaps some one else could verify?)

(I think I also had to put a cassette in with lugs which hadn't been punched to sort the relay out. I can't remember for sure)

Good luck

20th Apr 2019, 10:47 pm	#2
19Seventy7 Octode Join Date: Jun 2018 Location: Essex, UK. Posts: 1,307	Re: Aiwa AD-F410 Hi, I'm by no means an expert, but this could help I have an F640, which did this. I found that two small wires were touching, which shut the motor off, near the front of the mechanisms. I don't know if this could be the same on yours. (Perhaps some one else could verify?) (I think I also had to put a cassette in with lugs which hadn't been punched to sort the relay out. I can't remember for sure) Good luck