Re: Ferrograph Quiet Crackly Audio
Route to main HT:
HT from osc coil>>Pin 4 of SK4>>Pin 4 of PL4 (from here on also includes HT feed to anode of meter amplifier)>>Pin 7 of SK1>>Pin 7 of PL1>>Connection F on tape deck>>R2>>Switch 1C when set to Record>>Connection 4 on tape deck>>Pin 6 of SK3>>Pin 6 of PL3>>Main HT at the junction of C33/L5.
If that's any help.
Lawrence.
Last edited by ms660; 26th Oct 2020 at 9:57 pm.
Reason: missing word...of
|