UK Vintage Radio Repair and Restoration Discussion Forum - View Single Post - A GPO 746 and a liGo Bluewave; Struggling to get them to work together.

LTTGSecretary · 28th Oct 2020, 7:04 pm

Evening All,

As the thread title suggests, I recently purchased a LiGo Bluewave Bluetooth Gateway which I intend to use with a recently-purchased GPO 746. In my ignorance, however, I am struggling to work out how the two are able to connect. It appears that the 746 requires four wires going into it from the BT plug but the RJ11 Cable included with the LiGo device only outputs two wires.

I've just been looking at a wiring diagram for the 746 but I can't say that it helps me much.

Any help would be greatly appreciated, and I once again apologise for my ignorance here.

- Dan

28th Oct 2020, 7:04 pm	#1
LTTGSecretary Triode Join Date: Oct 2020 Location: Aberystwyth, Ceredigion, Wales, UK. Posts: 18	A GPO 746 and a liGo Bluewave; Struggling to get them to work together. Evening All, As the thread title suggests, I recently purchased a LiGo Bluewave Bluetooth Gateway which I intend to use with a recently-purchased GPO 746. In my ignorance, however, I am struggling to work out how the two are able to connect. It appears that the 746 requires four wires going into it from the BT plug but the RJ11 Cable included with the LiGo device only outputs two wires. I've just been looking at a wiring diagram for the 746 but I can't say that it helps me much. Any help would be greatly appreciated, and I once again apologise for my ignorance here. - Dan