Re: Help Pls = Grundig TK64 Motor Not running
Well, its another day and i spent most of on this Grundig TK64.
The problem is i cant find a schematic with motor connection diagram to match the unit i have. So some guess work.
PLEASE SEE attached details of me tracing the wires and substituting another cap in the place i though it should go, but still no luck..
1) Is the attached diagram / photos accurate ? its based on me tracing the wires
2) Where should the cap be connected ? from the middle wire to the Relay side OR the mains fuse side ?
3) I tried to connected a new cap between the middle motor wire (after isolating it) and the Relay side input power, but it still would not start the motor.
If i knew exactly which wires from the motor matched the schematic, i would just make some direct connections and bypass the 50/60 hertz switches.
|